Magnetic 1-Wire iButton with Blue Plastic Holder

Magnetic iButton with Blue Plastic Holder

Place of Origin: China(Mainland) Part Number: MG1990A-B Brand Name: CC
Min. Order Quantity: 100 Pieces Port: Guangzhou Payment Terms: T/T, Western Union, Paypal

Magnetic 1-Wire iButton with Blue Plastic Holder

Description
The MG1990A Magnetic iButton Fob consists of a nickel-plated steel ring pushed over an iButton (DS1990A), which is inserted into a plastic fob. When this fob is held close to the front face of the Magnetic Probe, it is pulled onto the probe’s face by the magnetic force exerted on the steel ring, and held firmly in place.
The iButton serial number (DS1990A) is a rugged data carrier that serves as an electronic registration number for automatic identification. Data is transferred serially through the 1-Wire protocol, which requires only a single data lead and a ground return. Every DS1990A is factory lasered with a guaranteed unique 64-bit registration number that allows for absolute traceability. The durable stainless-steel iButton package is highly resistant to environmental hazards such as dirt, moisture, and shock. Its compact coin-shaped profile is self-aligning with mating receptacles, allowing the DS1990A to be used easily by human operators. Accessories enable the DS1990A to be mounted on almost any object, including containers, pallets, and bags.

Key Features

Magnetic iButton DS1990A-F5
Can be held magnetically to the probe and transmits the data by an electrical interface
Unique, factory-lasered and tested 64-bit
Digital identification by momentary contact.
Chip-based data carrier compactly stores information.
Data can be accessed while affixed to an object.
Economically communicates to bus master with a single digital signal at 16.3k bits per second.
Standard 16 mm diameter and 1-Wire protocol ensure compatibility with INFORMATION BUTTON family.
Button shape is self-aligning with cupshaped probes.
Durable stainless steel case engraved with registration number withstands harsh environments.
Easily affixed with self-stick adhesive backing, latched by its flange, or locked with a ring pressed onto its rim.
Presence detector acknowledges when reader first applies voltage.
Stainless steel package with su304-0.3
Resistant to heat, Operating temperature range from -40°C to +70°C
Over 10 years of data retention

Applications

Security patrol, sauna door locks, electronic door locks
Door intercom, card systems, identification and banking
Communications, rail transportation, transportation and others

Compatible Readers/Probes:

Please Note: This so-called ‘Magnetic iButton’ does not have magnetism itself since it consists of an iButton, a steel ring and a plastic holder. It should work with a magnetic reader which has magnets inside.