DS1402D-DR8+ – Blue Dot Receptor iButton Reader Cable

DS1402D-DR8+

Place of Origin: China (Mainland)                 Part Number: DS1402D                  Brand Name: MAXIM
Min. Order Quantity: 1 Pieces                        Port: Guangzhou                                Payment Terms: T/T, Western Union, Paypal

 DS1402D-DR8+ iButton Reader Cable

Description
The DS1402D-DR8+ iButton reader cable is a coiled cable used to connect iButtons to 1-Wire masters, such as the LinkUSB. The DR8 suffix indicates that this cable is 2.4 m (8 ft) long when uncoiled. One end of the cable provides two “Blue Dot” connnectors that may be used either as a momentary touch or a dwelled contact for an iButton. The other end is a modular connector for the master.

The DS1402D-DR8 is a part of the DS1402 series. It is a 1-Wire network cable designed to connect any serial or USB 1-Wire port adapter that has a RJ11 jack with up to two iButtons simultaneously. The DS1402D-DR8 Blue Dot receptor cable can touch any iButton for reading, but can only retain the F5 version iButtons.

The DS1402 series incorporates four basic types of connectors, 1-Wire RJ-11, iButton, Touch-and-Hold Probe, and Blue Dot Receptor. The DS1402 series of 1-Wire network cables provides connectivity for iButtons. The cables are designed to connect any USB, serial, or parallel port 1-Wire adapter to any iButton. Both, the iButton probe cables and the Blue Dot receptor cables can touch any iButton, but can only hold the F5 version iButtons. The DS1402BR8 is the only cable that connects to the DS1401 iButton Holder. Applications of the DS1402-series 1-Wire network cables range from software protection and access control to asset management and thermal monitoring through handheld computers.

This cable is especially useful when mounted to a desk or other surface for testing iButtons or reading data from Thermocrons and Hygrochrons.

Key Features

• Coiled cable for connecting iButtons to 1-Wire networks (8 ft when fully extended)
• Convenient, off-the-shelf connectivity
• For momentary (F3/F5 MicroCan) or dwelled contact (F5 MicroCan only)
• Adhesive pad for mounting on objects
• Supports for up to two iButtons at once
• Can be used with any EDS host adapter equipped with a RJ11 jack (HA7Net, HA7E, HA5-xxx-R, and HA4B)
• Can be used with any Dallas Semiconductor port adapter. (DS9097E, DS9097U, DS9490R)

For more infomration on this product please visit its data sheet here: DS1402D-DR8 DataSheet.